Are you looking to upgrade your outdoor space? Imagine sipping your favorite morning brew while enjoying the fresh air and sunshine. With a coffee table that has an umbrella hole, you can create the perfect outdoor oasis that combines style and functionality.

Building the Perfect Table
To start, you’ll need to gather your materials. Begin by cutting the boards to a manageable length and then ripping them to 7″ wide to square off the edges. Next, cut the miters at 22.5 degrees using a miter saw for an octagon-shaped tabletop. For more precise cuts, consider using a brand new miter gauge.
To join the octagon together, cut a rabbet on the inside edge of each board. Use pocket screws for a secure connection. Adding 1×4 boards, ripped down to 3″ wide, will provide additional support. Screw these boards underneath the tabletop, spacing them using a quarter-inch piece of plywood.
Assembling the Table
Start from the center and work your way to the sides, cutting each board to size. Make sure to clamp the boards in place to hold them while you put in the screws. For the centerpiece with a corner cut off, trim and test until it fits perfectly. The edge boards with 45-degree angles on both sides are easier to install.
Once assembled, spend some time sanding the table to level out any uneven surfaces. You can always come back later for some finer sanding. To add a decorative touch, find the center point and draw a circle on the tabletop.
Building the Base and Legs
For the base and legs, use 2x4s cut to their exact dimensions. Use half-lap joints to join all the center pieces together. This involves cutting out a large notch, half the thickness of the wood, in each piece. By flipping the board and using one stop block as reference, you can ensure that the notches interlock perfectly.
With rabbets cut on the ends of the top boards, start the assembly by gluing and screwing the crosspieces together. Make sure not to put any screws in the middle where the umbrella hole will be drilled. Attach the legs to the lower cross brace and add clamping pressure to draw the joints together.
Finishing Touches
To ensure the tabletop rests securely on the base, create a rabbet that will hold it in place. Consider adding screws to the legs for additional stability. Round over the top edge using a router for a smooth finish.
Protect your table from the elements by applying three coats of exterior, water-based spar urethane. This will keep the redwood looking beautiful for years to come. If you want to build your own coffee table with an umbrella hole, you can find a free set of plans in the description.
Enjoy Your Outdoor Retreat
Creating the perfect outdoor space is all about combining style and functionality. With a coffee table that has an umbrella hole, you can enjoy your morning cup of coffee while staying shaded and protected from the sun. So why wait? Start building your outdoor retreat today and make the most of your time spent in the great outdoors.
Marmalade Cafe is here to help you create the perfect outdoor oasis for relaxation and enjoyment. Check out our website today for more inspiration and ideas to enhance your outdoor space.